Flyzone Tidewater Seaplane EP RTF 41.5" Airplane FLZA3430
- $132.09
This is the 2.4GHz radio controlled, brushless electric powered, ready to fly Tidewater Seaplane from Flyzone.Includes:RTF Tidewater Seaplane with 4-ch 2.4Ghz radioBrushless motor30A ESCPropLiPo batteryChargerTwo tip floatsInstruc..
- Brand: Flyzone
- Product Code:IDSPT0287
- Availability:In Stock
Tags: Airplane, RC Airplane, Flyzone, Tidewater, Seaplane, RTF, 41.5, Airplane, FLZA3430, Flyzone Tidewater Seaplane EP RTF 41.5" Airplane FLZA3430 buy in
This is the 2.4GHz radio controlled, brushless electric powered, ready to fly Tidewater Seaplane from Flyzone.
Includes:
- RTF Tidewater Seaplane with 4-ch 2.4Ghz radio
- Brushless motor
- 30A ESC
- Prop
- LiPo battery
- Charger
- Two tip floats
- Instructions
- Four AA batteries
Note: The servo listed as the replacement in the manual is not correct. The actual replacement is FLZA6283. The GPMA4224 can be used but the modeler will have to change the servo arm as well. The manual incorrectly lists the wingspan as 73" This is incorrect; the actual wingspan is 41.5 in (1055mm).
FEATURES
- Construction: AeroCell foam
- Wing: One-piece with motor and pod, wing attaches to fuselage with 1/4-20x2 nylon wing bolt
- Aileron Control: Dual servo
- Motor: 28-30-1300 kV brushless outrunner
- Radio: Tactic 2.4GHz TTX404 4-channel transmitter with TR624 6-channel receiver
- Electronic Speed Control: 30A
- Servos: Four micro (2-aileron, 1-rudder, 1-elevator)
- Battery: ElectriFly 3S 11.1V 2200mAh 30C with Star Plug
- Battery Charger: Great Planes AC/DC 3S balancing LiPo Smart Charger
- Propeller: 9x4.5 ElectriFly PowerFlow Slo-Flyer, plastic construction
- Spinner: 2" (51mm) gray plastic
- Landing Gear: Two tip floats on either side of wing
SPECS
Wingspan: 41.5 in (1055mm)
Length: 36 in (915mm)
Weight: 32 oz (905g)
Center of Gravity: Forward CG, 1-3/4" (44mm), Recommended CG, 1-7/8" (48mm), Aft CG, 2" (51mm)
All measurements are from the leading edge of the wing at the fuselage side
Control Throws
Low Rate
Elevator: 1/4" (6mm) 12°
Rudder: 1/2" (13mm) 14°
Ailerons: 1/4" (6mm) 11°
High Rate
Elevator: 7/16" (11mm) 15°
Rudder: 7/8" (22mm) 24°
Ailerons: 1/2" (13mm) 23°
