Losi Tenacity Truggy 1/10 4WD RTR LOS03011
Want a super tough truggy with a legendary 4WD platform? Start with the 1/10 scale Losi® TENACITY-T™ Truggy RTR. It's incredibly durable, fast and you can run it with the precision control of a Spektrum™ AVC® system. The TENACITY-..
- Brand: Losi
- Product Code:IDSPT0503
- Availability:In Stock
Want a super tough truggy with a legendary 4WD platform? Start with the 1/10 scale Losi® TENACITY-T™ Truggy RTR. It's incredibly durable, fast and you can run it with the precision control of a Spektrum™ AVC® system. The TENACITY-T features a new four-pole 3800Kv brushless motor and ESC from Dynamite that help you reach speeds of 50+ MPH on 3S power. And not only does the TENACITY-T include full metric hardware for worldwide compatibility, it has a composite chassis with a bottom-loading battery tray to keep things quick and easy.
*50+ mph speeds can be achieved with optional gearing.
TEN 4WD Platform
Based off the durable, high-performance TEN chassis, the TENACITY-T features a composite lightweight chassis frame with excellent ground clearance so you can tackle any terrain.
Dynamite 130A Brushless ESC and Fuze 4-Pole 3800Kv 550 Motor
The brushless ESC and motor provide off-the-chart power with a 2-3 cell Li-Po (sold separately)-with 3S power you can reach speeds of 50+ MPH! The ESC is waterproof, completely programmable and comes pre-wired with a high-current EC3 connector. It works with most sensorless brushless motors and is 2S and 3S Li-Po and Ni-MH compatible.
This truggy features a race-inspired truck body with sleek graphics.
All components are waterproof so you can drive in wet conditions, no problem.
Bottom-Load Battery Tray
To help withstand the trials and tribulations of off-road driving, the TENACITY-T was built on a durable reinforced composite chassis with a bottom load battery compartment. Quickly and easily make battery changes without removing the body.
12mm Race Inspired Composite Bodied Shock Absorbers
These provide a high level of stability and control on even the roughest terrain.
Stylish Wheel and Tire Design
Comes with an off-road style wheel design and a trench-digging tire that can plow through almost any conditions.
Spektrum DX2E ACTIVE radio system with AVC
The TENACITY-T comes with a reliable Spektrum radio and the convenience of AVC (Active Vehicle Control). Also includes the SPMSRS6000 receiver with steering priority for superior control.
Full-Throttle Freedom of AVC Technology
When you're ready to let the brushless motor off the chain, don't hold back. The receiver's built-in AVC (Active Vehicle Control) system will make hundreds of tiny throttle and steering adjustments per second, so more of the motor's power is translated into ballistic speed and acceleration instead of just flying dirt.
The Spektrum DX2E ACTIVE with telemetry lets you measure your actual speed via an optional speedometer that plugs into the DX2E ACTIVE.
Spektrum FPV Mount
You get an FPV mount that lets you easily attach an All-In-One Spektrum FPV system. (camera sold separately)
- TEN 4WD platform
- Dynamite 130A brushless ESC and Fuze 4-Pole 3800Kv 550 motor
- Speedometer option
- Spektrum DX2E ACTIVE radio system with AVC
- Waterproof components
- 12mm race inspired plastic bodied shock absorbers
- Race-inspired body
- New wheel and tire design
Length: 19.75 in (501.6mm)
Width: 13 in (330mm)
Height: 6.75 in (171.4mm)
Ground Clearance: 1.5 in (38mm)
Wheelbase: 13 in (330mm)
Weight: 6.0 lb (2.7kg)
Suspension: Coil-over, Independent
Drivetrain: 4WD with Sealed Bevel Gear Differential (Front, Center and Rear)
Tire Type: Medium-Soft All-Terrain
Motor or Engine: Non-Sensored Brushless, 550 4-Pole 3800Kv
Speed Control: Included
Radio: Spektrum DX2E ACTIVE 2-Channel with AVC
Servos: Spektrum 9KG 23T Waterproof Servo
Batteries: 7.4 5000mAh 2S 50C or 11.1V 5000mAh 50C 3S Hardcase Li-Po Battery with EC3 connector (Sold Separately)
Charger: Sold Separately
Gear Pitch: 1.0 Module
Wheel Size: 2.8 in (71.2mm) Diameter x 2 in (50.5mm) Width
Shock Type: 12mm Composite, Oil-Filled
Body: Tenacity T, Screen Printed
Ball Bearings: Yes
Experience Level: Beginner
Recommended Environment: Outdoor
Is Assembly Required: No