HPI Trophy Buggy Flux RTR HPI107016
- $234.09
This is the HPI Trophy Flux 1/8 Scale 4WD Electric Buggy Racer RTR. The brushless-powered RTR Trophy Buggy Flux from HPI is the go-to kit for all-out fun and excitement combined with mind-bending top speeds! The Trophy Buggy has b..
- Brand: HPI Racing
- Product Code:IDSPT0421
- Availability:In Stock
Tags: Car, Truck, Car & Truck, HPI, Trophy, Buggy, Flux, RTR, HPI107016, HPI Trophy Buggy Flux RTR HPI107016 buy in
This is the HPI Trophy Flux 1/8 Scale 4WD Electric Buggy Racer RTR. The brushless-powered RTR Trophy Buggy Flux from HPI is the go-to kit for all-out fun and excitement combined with mind-bending top speeds! The Trophy Buggy has been a hugely popular 1/8th buggy, and now that it's fitted with the demonically fast Scream brushless motor and the 4S-capable Flux Rage speed controller, you can finally see what all the excitement is about with 1/8th electric buggies at a great price!
Fully assembled right out of the box and fitted with a no-hassle HPI 2.4GHz radio system, the Trophy Buggy Flux is ready for you to drop in two 2S LiPo batteries for 14.4 volts of ground-crushing fun! Go brushless with the Trophy Buggy Flux!
Includes:
- HPI On-Road Sprint 2 Touring Car with the BMW M3 GT-2 Body
- Flux Vapor ESC
- Flux Vektor 5900kV brushless motor
- Body
- Wing
- 4 AA TX batteries
- 2.4GHz radio with waterproof steering servo
- Decal sheet
- Instruction manual
Requires:
- 7.2V NiMH battery stick pack with Dean's connector
- Battery charger to match selected battery
- Building and track equipment
FEATURES
- Chassis: 3/16" (4mm) plastic
- Drive: Four-wheel belt drive
- Motor: HPI Flux Vektor 5900kV brushless (not 3S LiPo compatible)
- Radio: 2-channel 2.4GHz, SF-10W waterproof steering servo and four AA transmitter batteries
- Electronic Speed Control: Waterproof HPI Flux Vapor, LiPo compatible and fully programmable with the USB Programming Kit (not included)
- Ball Bearings: Full set, rubber sealed
- Shocks: Oil-filled, plastic bodied
- Differentials: Planetary gear, sealed
- Transmission: Single speed with Flux optimized gearing
- Tires: HPI X-Pattern Racing Tire 1.02" (26mm) width, 1.9 (49mm) diameter; Rear, 1.2" (31mm) width, 1.9" (48mm) diameter
- Wheels: Rays Volk TE37 six spoke black 1.9" (48mm) diameter, 1.02" (26mm) wide
- Pinion Gear: Steel 48 pitch
- Spur Gear: 48 pitch, composite construction
- Body: Polycarbonate painted and trimmed with body trim and light details and clear plastic windows, matte black finish rear wing
- Bumpers: Front, foam
- Suspension: Fully adjustable, extra-long upper links with new multiple mounting positions, and adjustable droop
- Ackerman: Adjustable, Ackerman describes the effect of the inner front wheel turning faster than the outer front wheel during turns
- Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Steering: Bearing supported bell-crank type with servo saver
SPECS
VEHICLE
Length: 17" (431mm)
Width: 7.5" (190mm)
Height: 5" (127mm)
Weight: 2.7lbs (1245g)
Wheelbase: 10" (254mm)
Front Track: 7.4" (187mm)
Rear Track: 7.7" (196mm) side to side at outer edges of wheel
Front Tread: 6.3" (160mm)
Rear Tread: 6.6" (169mm) side-to-side at wheel centers
Ground Clearance: 0.35" (9mm)
BODY
Length: 17.4" (442mm)
Width: 7.5" (190mm)
Height: 4.6" (117mm)
