All Categories

  • All Categories
  • Radio System
  • ESC - SPEED CONTROL - AIR
  • ESC - SPEED CONTROL - SURFACE
  • RADIO TRANSMITTERS - AIR
  • RADIO TRANSMITTERS - SURFACE
  • RECEIVERS - AIR
  • SERVOS - AIRPLANE & HELI
  • SERVOS - CAR & BOAT
  • RC Parts
  • AIRPLANE PARTS
  • BATTERIES
  • BOAT PARTS
  • CAR & TRUCK PARTS
  • CAR BODIES
  • CHARGERS
  • DRONE PARTS
  • HELICOPTER PARTS
  • TIRES & WHEELS
  • RC Vehicles
  • Car & Truck
  • RC Airplane
  • RC Boat
  • RC Drone&FPV
  • RC Helicopter
  • RC Tank

Tamiya Ford Bronco 1973 CC01 1/10 Rock Crawler Kit TAM58469

  • $143.82

This is the Tamiya Ford Bronco 1973 CC01 1/10 Rock Crawler Kit. The Ford Bronco is a famous American 4X4 off-road vehicle. This 1970's model was among the first series called Early Bronco which were produced during 1965-1977...

  • Brand: Tamiya
  • Product Code:IDSPT0722
  • Availability:In Stock

Tags: Car, Truck, Car & Truck, Tamiya, Ford, Bronco, 1973, CC01, 1/10, Rock, Crawler, Kit, TAM58469, Tamiya Ford Bronco 1973 CC01 1/10 Rock Crawler Kit TAM58469 buy in

This is the Tamiya Ford Bronco 1973 CC01 1/10 Rock Crawler Kit. 

The Ford Bronco is a famous American 4X4 off-road vehicle. This 1970's model was among the first series called Early Bronco which were produced during 1965-1977. Three types of bodies were released; the fully-open Roadster, the single cabin pick-up Utility, and the Wagon which had a resin roof. The body featured triangular protrusions on both sides on the curved front hood which worked well as a guide for drivers to accurately measure the body size while driving. The front suspension features coil springs combined with the rigid axle, which was a first for mass-produced 4X4 vehicles and works well both on-road and off-road. The Bronco is still greatly popular around the world, particularly in America, where many are used as cross-country and rock crawling vehicles.

Includes: Tamiya '73 Ford Bronco kit with oil-filled shocks, 540 motor, ESC, clear body, tires, wheels, LED light kit, shock oil, 16 tooth pinion gear, spur gear. 

Requires:

  • Radio: 2-Channel with 1 Servo
  • Batteries: Eight AA for transmitter
  • Battery: 6-cell stick pack w/ standard connector
  • Charger: AC/DC timed or peak for 6-cell battery
  • Misc. Items: Building and track equipment

FEATURES

  • Chassis: CC-01, plastic tub construction
  • Drive: Four wheel drive, shaft driven
  • Motor: 540 electric motor
  • Electronic Speed Control: TEU-104BK (TAMM4541) with reverse
  • Lights: Tamiya TLU-01 (TAMC1394) LED light unit with four LED lights
  • Shocks: Oil-filled, black plastic construction
  • Gearbox: Front and rear sealed gearbox
  • Differentials: Planetary gear, rear differential may be locked during assembly
  • Transmission: Single speed
  • Tires: Semi-pneumatic all-terrain, rubber construction 1.2" (30mm) wide, 3.5" (90mm) diameter
  • Wheels: Five spoke chrome plated plastic, 1" (26mm) wide, 1.9" (48mm) diameter
  • Bumper: Front, plastic construction, black in color
  • Suspension: Front, long stroke double wishbone
    Rear, four link rigid
  • Camber Tie Rods: Fixed non-adjustable
  • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
  • Steering: Bell-crank type with servo saver and adjustable linkage

SPECS

Vehicle
Length: 16.8? (426mm)
Width: 7.7" (195mm)
Height: 8.5" (215mm)
Weight: 53.3oz (1510g)
Wheelbase: 9.9" (252mm)

Body
Length: 15" (381mm)
Width: 7.3" (185mm)
Height: 5.3" (135mm)