Tamiya RC Farm King (Wheelie) WR02 1/10 Electric Truck Kit TAM58556
- $102.00
This is the Tamiya RC Farm King Wheelie WR02 Kit. This R/C assembly kit recreates the hard-working mainstay of farm life, the tractor. The poly-carbonate body features a comically-styled front mask over bonnet, a large plow on the..
- Brand: Tamiya
- Product Code:IDSPT0754
- Availability:In Stock
Tags: Car, Truck, Car & Truck, Tamiya, Farm, King, (Wheelie), WR02, 1/10, Electric, Truck, Kit, TAM58556, Tamiya RC Farm King (Wheelie) WR02 1/10 Electric Truck Kit TAM58556 buy in
This is the Tamiya RC Farm King Wheelie WR02 Kit. This R/C assembly kit recreates the hard-working mainstay of farm life, the tractor. The poly-carbonate body features a comically-styled front mask over bonnet, a large plow on the rear and exhaust pipes on either side of the driver's seat. A driver figure with ten-gallon hat is also included.
The WR-02G chassis features a heavy duty monocoque frame which is equipped with 97mm and 130mm diameter wheels on the front and rear respectively for a realistic scale presence. The motor is positioned along the center-line of the chassis and power is delivered to the rear wheels via fully-enclosed gearbox equipped with a gear differential. 4-wheel double wishbone suspension makes for realistic mechanical movement. The WR-02G is designed with a wheelie bar to enable fun, wheels in the air driving action.
Includes:
One Tamiya Farm King Wheelie kit with brushed motor, ESC, clear body, 18T pinion gear, tires, wheels, shocks, decal sheet, and an instruction manual
Requires:
- Radio: 2-channel with high torque steering servo
- Battery: 7.2V stick pack with standard connector
- Battery Charger: To match selected battery
- AA batteries, paint, building and track equipment
FEATURES
- WR-02G monocoque chassis with wheelie bar
- Rear wheel drive
- Tamiya TEU-105BK ESC with reverse (TAMC5055)
- 540 brushed motor, preinstalled to assembled gearbox
- Four wheel double wishbone suspension
- Bevel gear differential
- Clear polycarbonate body
- Molded white plastic driver figure
- Coil over plastic body friction shocks, not oil-filled
- One-piece white plastic wheels, 12mm hex
- Front tires, outer diameter 3.8" (97mm), 2.1" (54mm) wide
- Rear spike tires, outer diameter 5.1" (130mm), 2.2" (56mm) wide
- Direct steering servo with tie rods
- Spring type front bumper to absorb minor impacts
- Non-adjustable camber
- Adjustable caster/toe-in
SPECS
Length: 14.3" (363mm)
Width: 9.9" (253mm)
Height: 9.6" (245mm)
Body
Length: 14.1" (359mm)
Width: 9.4" (240mm) at widest point
Height: 8.5" (216mm) measured at cab enclosure
