BLADE Vortex 150 Pro (BNF)
- $147.39
The BNF Vortex 150 Pro from Blade is an FPV-capable drone designed for outdoor use by intermediate-level pilots. This high-speed flyer is powered by a Fusion F3 flight controller and features four V-Spec 1306-3..
- Brand: BLADE
- Product Code:IDSPT0115
- Availability:In Stock
Tags: Drone&FPV, RC Drone&FPV, BLADE, Vortex, 150, Pro, (BNF), BLADE Vortex 150 Pro (BNF) buy in
The BNF Vortex 150 Pro from Blade is an FPV-capable drone designed for outdoor use by intermediate-level pilots. This high-speed flyer is powered by a Fusion F3 flight controller and features four V-Spec 1306-3100 kV motors with customized ESCs. The flight controller features integrated Betaflight software, so you can fine-tune flight performance. The Vortex 150 Pro's onboard FPV system consists of a 600 TVL wide-angle CCD camera and video transmitter that broadcasts to compatible FPV headsets (sold separately). All components are housed within a light-but-durable 2mm-thick carbon fiber frame.
This is a Bind-and-Fly (BNF) bundle that comes with everything you need except a transmitter (radio controller), flight battery with charger, and optional FPV monitor and/or headset.
- Fully Integrated
- The Vortex 150 Pro comes with an integrated flight controller, full-graphic OSD, and 40-channel video transmitter. Loose wiring is virtually nonexistent for a professional look that's easy to maintain.
- Seven 32-Bit ARM Processors
- The Vortex 150 features seven fully integrated 32-bit ARM processors. There's a dedicated ARM for the flight controller, another for the full-graphic OSD, another for the programmable LED board, and one for each of the four custom ESCs.
- Tough Construction
- Built to survive serious crashes, the Vortex 150 can take a hit and keep on flying.
- Fusion F3 with BetaFlight
- The Fusion F3 flight controller is equipped with BetaFlight firmware, a 32-bit processor, and 8 kHz loop times for an intuitive control feel out of the box. Plus, the software is future-proof with supporting updates easily uploaded via USB.
- Dynamic Power Control
- The Dynamic Power Control function of the video transmitter lowers power automatically when the Vortex 150 is disarmed or ready for a race to start, so that interference from other racers is minimized.
- Integrated 5.8G Hz Video Tx
- The fully integrated video transmitter supports all standard FPV channels and power levels from sub -1 to greater than 600mW.
- Touch-n-Race
- A TNR (NFC) antenna provides full support for the ImmersionRC Personal and Race Director's wand. The latter enables additional channels for events with special spectrum use permissions.
- PitStick Mode
- When placed in PitStick Mode, the Vortex 150 will power up with the video transmitter disabled, and will only start transmitting when instructed to by the R/C transmitter.
- Bright LEDs
- A set of eight 24-bit RGB LEDs is protected between the upper and lower frames on the tail end. Through a dedicated 32-bit ARM processor, users can program a favorite color, brake lights, or turn indicators.
- Lost Model Alarm
- The Vortex features a lost model beeper that will help you locate your drone if it gets lost.
- Custom V-Spec Motors
- The custom V-Spec 1306-3100 kV brushless outrunner motors feature a high-speed rating and spin 3-inch props for the punch to accelerate quickly.
- Full Graphic Display with EzOSD
- The full-graphic On Screen Display (OSD) provides in-flight updates of critical parameters. The EzOSD menu allows all options to be programmed in the field using the RC transmitter and a headset or monitor.
