Walkera Furious 215 RTF Racer Quadcopter with 600 TVL Camera
- $177.99
Equipped with a 215mm wheelbase, 2500 Kv brushless motor combined with 5040 5" propeller, 4S power battery, and a carbon fiber airframe, the Furious 215 RTF Racer Quadcopter from Walkera is suitable for both ra..
- Brand: Walkera
- Product Code:STS00749
- Availability:In Stock
Tags: Drone&FPV, RC Drone&FPV, Walkera, Furious, 215, RTF, Racer, Quadcopter, with, 600, TVL, Camera, Walkera Furious 215 RTF Racer Quadcopter with 600 TVL Camera buy in
Equipped with a 215mm wheelbase, 2500 Kv brushless motor combined with 5040 5" propeller, 4S power battery, and a carbon fiber airframe, the Furious 215 RTF Racer Quadcopter from Walkera is suitable for both racing events and freestyle flying. The mainstream F3 flight controller enables players to perform autonomous tuning and is equipped with a boot key to brush and upgrade Betaflight and Cleanflight SP Racing F3 firmware.
With carbon fiber reinforced polymer at its head and metal posts installed with three screws at the bottom and top, the camera withstands heavy impacts. The battery installs on top of the quadcopter, and the power distribution board is integrated with the airframe bottom plate creating a stable center of gravity.
The quadcopter is equipped with a 600 TVL camera that operates under low-light and backlit conditions. It features a 130° field of view and a 2.5mm wide-angle lens. The video transmission system supports 600mW power switching (FCC version) and achieves a maximum transmission distance of 0.9 miles via the HG omnidirectional mushroom antenna. Thanks to the PPM/SBUS receiver connector, the flight controller enables DIY pilots to install third-party receivers that are controllable using a third-party remote control.
- Brushless motor designed to be coupled with safety guard and buffer bracket
- ESC supporting Oneshot 125/Oneshot 42
- Stable center of gravity by lowering battery fitting surface to 30mm
- Rectangle airframe with battery on top
- Four robust arms with 4mm thickness
- Triangle aluminum components affixed to airframe
- Aluminum alloy posts
- Bottom plate tail protects video transmission antenna
- Camera mount with tightening straps at multiple directions
- Compatible with sports cameras such as GoPro HERO4, GoPro HERO5 session, Xiaoyi, and Runcam
- Electronic speed controller (ESC) output
- Onboard active beeper and integrated OSD with tuning connector at its bottom
- XT60 power connector and video transmission antenna connector
- HD night vision camera
- Adjustable angle of view
- Provides 5V LED light connectors at both sides of PDB, facilitating DIY installation of LED strips
- Features taillight and supports LED strip programmable light strip
- Mr Drone simulator activation code and a USB dongle are included
