Tekno RC 1/8 Superlight 4WD Electric Buggy Kit TKR5004
- $223.89
This is the Tekno RC EB48SL 1/8 Scale 4WD Competition Super Light Electric Buggy Kit. This kit comes with updated V2 hinge pin brace system for exceptional adjustability and an adjustable front arm sweep and angle to make the car ..
- Brand: Tekno RC
- Product Code:STS00000159
- Availability:In Stock
Tags: Car, Truck, Car & Truck, Tekno, 1/8, Superlight, 4WD, Electric, Buggy, Kit, TKR5004, Tekno RC 1/8 Superlight 4WD Electric Buggy Kit TKR5004 buy in
This is the Tekno RC EB48SL 1/8 Scale 4WD Competition Super Light Electric Buggy Kit. This kit comes with updated V2 hinge pin brace system for exceptional adjustability and an adjustable front arm sweep and angle to make the car more aggressive (swept forward), or easier to drive (swept back). This kit is extremely easy to work on with minimal screw count and integrated electronics tray/mud guard for easy removal of electronics.
Includes:
- EB48SL Competition Super Light Buggy Kit with Clear Body
- Rear Wing
- Motor Mount
- Shocks
- Shock and Diff Oil
- Decals
- Instruction Manual
Requires:
- 2-3 channel radio with high-speed steering servo (also, standard servo if using brake)
- Brushless motor designed for 1/8 scale buggies
- Pinion Gear- Mod 1, Tekno RC 11 - 30t recommended
- 2S LiPo battery
- 1/8 scale buggy tires
- 1/8 scale buggy wheels with 17mm hex
- Battery charger for selected LiPo battery
- Paint, tools and track equipment
FEATURES
- Chassis: CNC machined aluminum, 0.16" (4mm) thick, black in color super narrow design-widest point is 125mm, less than 5" from mudguard to mudguard, short chassis overhang provides better bump handling and jump landing, adjustable chassis brace system for fine tuning flex with front,
center and rear braces - Drive: Four-wheel shaft, CV driveshaft’s with captured pins
- Motor Mount: Two-piece CNC aluminum construction with dual clamping gear mesh adjustment, lightweight direct to diff mount design
- Differentials: Three lightweight fluid filled bevel gear type with redesigned gears with one-piece cross pin design for increased durability
- Battery Tray: Integrated with mud guard and sunken into chassis for super low center of gravity, tray accommodates one 4S or two 2S LiPo packs
- Shocks: 16mm big bore, oil filled, CNC threaded shock bodies, caps, cartridge caps, and adjustment nuts, 4mm hardened steel polished shafts, options for vented cap, emulsion, or standard shock configurations, new clamping spring perches with captured shock boots, conical and tapered piston design for different rebound and compression rates
- Shock Towers: 0.16" (4mm) thick CNC machined 7075 aluminum
- Body: Clear polycarbonate buggy, with white plastic high-downforce wing and low CG wing mount
- Suspension: All new SCT410.3 front and rear geometry, adjustable front arm sweep and angle, new longer rear sway bars for better consistency, new V2 hinge pin brace system
- Steering: Narrow pivot posts provide zero bump geometry with nearly zero slop, CNC aluminum Ackerman plate rides on 4 precision bearings, adjustable
bump-steer and Ackerman, Ackerman describes the effect of the inside front wheel turning faster than the outside front wheel during turns, adjustable steering stops and full ball bearings - Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
SPECS
Buggy
Length: 20.5" (522mm)
Wheelbase: 12.7-13.2" (323-335mm)
Width: 12" (306mm)
Weight: 6.5lbs (2950g) with common electronics & options
Diff Ratio: F/R 10/40t, Center 44t
Battery Tray Dimensions: 1.96 x 5.8" (50 x 148mm) 2x2s or 1x4s config
Body
Length: 13.25" (336mm)
Width: 4.9" (125mm)
Height: 3.6" (86mm)
